Log longitudinal cutting machine AS221

Machine description

Logs are cut via 4 circular saws, 2 top saws and 2 bottom saws.
Log is put on the table and is transported, while 4 circular saws cut of two sides.
Technical characteristics:
Diameter of log for processing: 120 – 300 mm
Length of log for processing: 1200 – 1900 mm
Width of cut product: 70 – 165 mm
Diameter of circular saw: 450 mm
Bore of circular saw: 70 mm
Rotation of circular saw: 2930 rpm
Feeding speed: 6 – 18 m/min
Dimensions of machine:
Length: 6440 mm
Width: 1270 mm
Height: 1940 mm
Electrical current: 400/50/3 V/Hz/Ph
Number of electrical motors: 7 pc
Capacity bottom motors: 2×11 kW
Capacity top motors: 2×7,5 kW
Capacity feeding motor: 1,5 kW
Speed cutting motors: 2900 rpm
Machine and main aggregates:

Pos. Name
1 Feeding table
2 Frame
3 Dust extraction hood
4 Feeding gear
5 Unloading table
6 Doors
7 Main gear
8 Electrical control
9 Electrical cabinet
10 Protection curtains
11 Producer’s table
12 Unloading gear

Control of the machine:

Pos. Controls and their function
1 Feeding adjustment handle
2 Screw for closure
3 Machine switch of (emergency) knobs
4 Saw on knob
5 Feeding stop knob
6 Feeding “forward” switch
7 Feeding “backward” switch
8 Main switch
9 Grounding screw
10 Chain tensioning screw
11 Machine leveling screw
12 Thickness of product adjustment
20 Thickness of product adjustment stop
21 Lower protection curtain lowering handle
22 Upper protection curtain rising handle

Kinematic schema:

Machine made in Lithuania.
Machine with CE marking.